Industrial Cylinders

Single and double-acting industrial hydraulic cylinder. Bore 25-320 mm, stroke 100–7,000 mm (buckling-limited, calculated per project). For tipping, waste, mobile platform, forklift, construction, agriculture and industrial applications.

Quote for this product Other families

360° Detail

Real production model

An actual cylinder from SOLIDWORKS production data. Drag to rotate and inspect.

•••

drag · button to extend/retract

Technical specs

Spec

Type: Single-acting · Double-acting
Bore: 25-320 mm
Rod diameter: 15-250 mm
Stroke: 100–7,000 mm (buckling-limited)
Rated pressure: 250 bar as standard, higher to drawing
Test pressure: To drawing, otherwise 1.5 × nominal pressure (ISO 10100)
Mounting: Clevis · Flange · Foot · Trunnion · Rod End

Built to your drawing

These values are typical production ranges. Any combination of bore, stroke, pressure and mounting type is built to the customer's drawing or load profile and produced in series. The seal brand is entirely the customer's choice; the requested brand is sourced and fitted.

Application

Typical use

Dump truck & semi-trailer

Single-acting tipping cylinder, body lift.

Environmental waste equipment

Double-acting compactor, lifter (municipal vehicles).

Mobile platform & crane

Outrigger, scissor platform, manlift, boom extension.

Industrial machinery

Press, forming, auto-stop, die pressing.

Material

Construction

Body (tube): EN 10305-1 E355: cold-drawn, seamless, honed tube, H8/H9 bore tolerance
Rod: C45E (Ck45) or 42CrMo4, hard-chrome plated (typically 30 µm per side, min. 20 µm)
Heads and pistons: C45
Caps and other welded parts: Weldable St52
Seal set: NBR · HNBR · PU · FKM · PTFE (customer choice)

Standard

Reference standards

Per customer drawing dimensional compliance
ISO 10100 acceptance test
EN 10305-1 tube standard
EN 10204 3.1 inspection certificates for tube and rod, on request

Standard titles are dimensional references; certificates are supplied per product on request.